03-08-2014, 05:49 AM | #45 |
Lieutenant
158
Rep 595
Posts |
Imagine everywhere you go fake M3's and GT3's it would certainly devalue the ownership experience. I view watches and cars as amazing machines (one big the other small) that someone has devoted a great deal of time, energy and skill to produce. Shame on those that lack any ambition greater than to copy, steal and devalue another mans work. Just my .02
__________________
2017 M2 Coupe Black Sapphire Metallic
|
Appreciate
0
|
03-08-2014, 07:02 AM | #46 |
Brigadier General
297
Rep 3,351
Posts |
If you do wear a fake Swiss watch, don't fly International to an Airport in Switzerland with it. Customs will seize it and fine you something like $500.
Customs seize 5,000 phoney watches in Zurich The federal customs administration (FCA) said on Monday that the phony timepieces were among 9,000 counterfeit luxury goods items seized at the Kloten airport at the end of August and at the beginning of September. The seizure, which involved around 5,000 watches, was one of the largest ever made involving postal trafficking in Switzerland, the FCA said. The Federation of the Swiss Watch Industry (FH) issued a statement congratulating customs authorities on the seizure. “Counterfeiting is a serious problem for innovative Swiss industries and watchmaking is particularly hard hit,” the FH said. “Economic losses resulting from counterfeiting are in the order of two billion francs ($2.21 billion) in Switzerland alone,” it said. At a global level, the losses “add up to several hundred billion or more”. The FH and its Anti-Counterfeiting Group said it is continuing activities against the phony watch trade and annually seizes and destroys several hundred thousand watches. Last edited by Lester; 03-08-2014 at 07:10 AM.. |
Appreciate
0
|
03-08-2014, 07:43 AM | #47 | |
Brigadier General
2516
Rep 4,381
Posts |
Quote:
|
|
Appreciate
0
|
03-08-2014, 09:46 AM | #48 | |
Lieutenant General
11720
Rep 11,185
Posts |
Quote:
And in regards to having an opinion on the subject: there are only two choices mate. You either think it's OK, or you think it's not OK. So having an original thought here would be difficult. I could write a small thesis on it, but I won't. It's a bit of a pride thing: I am from Europe and most imitated or forged (faked) copies of luxury items are European brands. Seeing them be copied and pawned off as the real thing, it doesn't sit right with me. Again, sorry if this offends you or makes you feel bad. |
|
Appreciate
0
|
03-08-2014, 10:20 AM | #49 |
Private
1
Rep 55
Posts |
[QUOTE=Semi-Poor;15568172]Imagine everywhere you go fake M3's and GT3's it would certainly devalue the ownership experience. I view watches and cars as amazing machines (one big the other small) that someone has devoted a great deal of time, energy and skill to produce. Shame on those that lack any ambition greater than to copy, steal and devalue another mans work. Just my .02[/QUOTEd
Add another $.02 to that. Well said
__________________
2013 135i Convertible Cashmere Grey, Savanna Beige
Premium Cold & Tech Package, DCT, Dinan S2 2013 335i Mojave Luxury, Dakota Venetian Beige Cold/Premium Package, NAV, Driver Assist |
Appreciate
0
|
03-08-2014, 10:24 AM | #50 | |
-
11818
Rep 23,186
Posts |
Quote:
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
|
Appreciate
0
|
03-08-2014, 10:29 AM | #52 |
-
11818
Rep 23,186
Posts |
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
03-08-2014, 10:47 AM | #53 | |
Lieutenant
28
Rep 454
Posts |
Quote:
I feel the same about watches. I own a Seamaster that I wear regularly. It cost more than some of my buddies make in a few months. When I wear it, no one notices or says anything. Which is good, since they'd be shocked to know how much it cost. I feel the same about the watch as I do my BMW. I like nice things and feel a certain satisfaction about owning them. Hope that makes sense.
__________________
2013 Jet Black 135is | 6MT | Coupe | #381/586
|
|
Appreciate
0
|
03-08-2014, 11:58 AM | #55 | |
Captain
321
Rep 905
Posts |
Quote:
|
|
Appreciate
0
|
03-08-2014, 04:42 PM | #56 | |
Major General
1910
Rep 5,521
Posts |
Quote:
If it weren't for the replicas, I would never have had an interest in a real watch. So I have the fake watches to thank for giving me a new interest. Would I buy another replica now? Sure, if I found a good one I like, why not try it out?
__________________
Auto Detailing Enthusiast!
|
|
Appreciate
0
|
03-08-2014, 06:04 PM | #57 |
Colonel
923
Rep 2,710
Posts
Drives: MB E350 4MATIC Estate
Join Date: Feb 2012
Location: Sherman Oaks, CA
|
The only reason to buy a fake of anything is if you cant afford the real thing.
Instead of faking it, wear (or drive) what you can afford with pride. I'd rather wear a real Festina than a fake Rolex. |
Appreciate
0
|
03-08-2014, 07:38 PM | #59 | |
Captain
321
Rep 905
Posts |
Quote:
I mean obviously they can physically scrounge up the cash or credit to obtain these items, but they can't actually "afford" them. |
|
Appreciate
0
|
03-08-2014, 08:20 PM | #60 |
Colonel
723
Rep 2,003
Posts |
I don't know who's worst - someone who prides themself on being able to afford a luxury, though relatively useless item, or someone who buys a fake one at 1/50th of the cost for kicks not really believing they are fooling anyone.
I guess OP is pissed at people who do this - for devalueing the enjoyment of his hard-earned attainment. I never understood watches, but not doubt I am a brand whore when it comes to certain things - perhaps only cars at the moment I can think of. It all goes back to the question how do we find value and seek enjoyment in life. Give a woman a brand name hand bag and 10/10 would like it, just some more than others. Now is it the true properties of the luxury item you enjoy, or do you just like the feeling of having something expensive? Like I couldn't give a damn if someone tried to knock off my car (528 ) because i know it's a different car underneath and it's just trying to look the same.. but if I were concerned other people might be less impressed by it? Maybe.. |
Appreciate
0
|
03-08-2014, 08:27 PM | #61 | |
Major General
1064
Rep 5,660
Posts |
Quote:
Notes:
Introduction: I need to start by saying despite what it may feel like to you and me as individuals, just about any mechanical watch costing $2K+ has to be seen as a luxury item, even though there are lots of other watches that cost many times $2K. The reason is simply that below $2K one can get substantively all the functionality, durability and accuracy one is that there exists to be had from a standard mechanical watch, i.e., time-only, time + date; time, date + chrono; and/or time, date + power reserve indicator. Yes, the time keeping accuracy can run from +/- three or four seconds per day to +/- 18 seconds per day, but I think it's safe, from a practical standpoint, to consider any of those accuracy measures as "accurate enough" for most anyone's needs. The major impact is just how often one will have to adjust the time on the watch. If that's really that bothersome, perhaps one should choose a quartz watch, all of which have accuracies measured in terms of seconds per month or seconds per year. My Thoughts on Your Thoughts: Your line of thought is right on target. There is absolutely no rational, empirical -- from a consumer perspective -- about why any watch costs $10K+. The same can in fact be said of just about any watch that is a luxury watch. Another way to say that is "any watch that is more than purely functional." There are rational reasons for why that is the way it works, but the prices themselves cannot be rationally justified by a consumer. They can, however, be emotionally justified and that's exactly the approach makers of luxury goods take to promote their products. (Why they do so and why it works requires an understanding of several disciplines --- industrial psychology, marketing (advertising, promotion and pricing strategy), sociology, and economics are the major ones. I'm not going into all that...this post is already long enough.) What Goes Into Watch Prices Once one gets above about $2000 for an uncomplicated or for a watch having just a basic complication watch (chrono or power reserve only) , one has to realize that the retail price of the watch includes labor, material, overhead and intangibles. Labor can be human and/or machine effort to build the watch even though, from an accounting standpoint, they are differently classified. Consumers can consider them as one just to keep things simple. Similarly, the intangibles don't have a place in a company's books of record, but they do play into pricing strategy and implementation. Now, I think most folks won't gripe too much over the cost of labor, materials and overhead. It's the intangible aspect that galls or befuddles them. While nobody lacking access to a company's internal records can specifically identify how much of a watch's cost is apportioned to each of the components, either "good sense" or comparative analysis will tell one that it cannot, for $2K+ watches possibly be more than half the MSRP of the watch. Another thing to realize is that as the MSRP of a watch increases, the cost components don't increase at a corresponding rate. Taken together, that means then that the intangible component is what's increasing. The intangible part if the MSRP is nothing more than the premium the maker/retailer assigns to the value of their brand name. One can think of it as shown below, although again, that's not how prices are accounted for or determined. Luxury goods MSRP equals: + Cost of Labor + profit assigned to labor + Cost of Materials + profit assigned to materials + Cost of Overhead + profit assigned to overhead + Any additional profit the maker thinks they can obtain. This is where the intangible portion of the cost comes in. Pretty much all brands assign profit to the three tangible components of cost, but no-name or non-status-name brands assign far less to the intangible component. (An odd and interesting fact is that if they simply did increase the price by boosting the intangible component, consumers would actually perceive the watch to be higher quality and would pay the extra amount.) Fakes vs. Authentic Rolex Watches Now when it comes to matter of fakes versus authentic products, Rolex happens to be a pretty good pricey brand to use to illustrate. The reason is that Rolex make and sell a very basic watch at comparatively huge prices. Rolex Oyster collection watches don't have any of the fancy, artistic embellishments one can find on other watches at prices similar to Rolexes. Also, Rolex movements are "generic" in the sense that the movement inside any Oyster isn't appreciably different from the movement inside any other one. Even the Daytona, which is a chronograph, is the same base movement; it just has a chronograph module "bolted on." It's true that Rolex, as your video illustrated, have outstanding attention to detail when it comes to executing the build of the watches. However, like many things German (remember that the Rolex Oyster design is not Swiss, but rather German), it's greatly over-engineered. ETA and others may not all have the same level of attention to detail, but as ETA's track record has shown, their movements have that attention to detail in the places that make a difference in the long term usability, dependability, etc. of the watch movement. There are other movement makers that are quite the same in that regard, but yes there are those too that don't. Some of the movements found in some fakes are certainly not as well crafted and the "shortcuts" can, in those movements, make a difference. The "So What?" Factor Nemesis, the video you provided is quite good at identifying traits that distinguish an authentic Rolex from a fake. That's great and useful information for anyone seeking to buy a new Rolex Sub (and to a lesser extent any Rolex) from a non-authorized dealer or a used one from any seller. What the video didn't discuss, and what I think goes through folks' minds when they choose to buy fakes, is which if any of those differences matter. It comes down to the value proposition. What benefit doe one actually get in return for having spent so much more, and are the benefits worth the extra money? Recognizing that authenticity, in and of itself, is neither a benefit nor a detractor (aside from any legal/seizure risk associated with the fakes), let's look at some of the things from the video in your post.
Authentic Non-Rolex Watches: How they differ from a Rolex Rolex is somewhat unique among pricey watchmakers because they really make no effort to decorate their movements. Rolex is all about durability, functionality and practicality. Practicality in all respects except price. In that sense, it's safe to say that once really can't find a watch that's better put together than a Rolex. (One can find watches that are as well put together.) That's the difference between being "the best" and being "number one." Many makers can be "the best" simply because on this or that basis of measurement, they are equal and none others are better. Being "number one" requires a basis of comparison against which one competitor empirically outperforms all others. If the basis of measurement has anything to do with watch movement decoration, Rolex is at the bottom of the barrel right along with ETA, Sellita, and many other movement makers. (I don't know what brand I'd cite as #1, but that's not the point and it doesn't matter anyway. It's just clear that Rolex isn't anywhere near #1 on that measure.) I went through the preceding discussion to provide a framework for considering the fake PPs, IWC, JLCs, Breguet, AP, VC, etc. that one can find in the marketplace. The watches made by those companies differ from a Rolex Oysters in two key dimensions: they all have greater and lesser degrees of decoration on their movements and they can have complications other than just a chronograph and/or power reserve indicator function. The decorations include things like
For example, beveling has some functional value because it removes burrs that could otherwise eventually fall off a piece of metal and "clog up the works." Beveling also can reduce corrosion by dint of its smoothing of a surface. It makes the beveled area less amenable to being gripped onto by whatever substance might want to grab hold and start the corrosive process. Of course beveling is often found on movements that have more than a few other very "grippy" surfaces, so while one's beveled edges won't corrode, the other surfaces will. I don't generally tout the functional benefit of beveling because I feel that in this era, it's something of a moot point. As a matter of trying to provide as candid info as I can, I suppose if a person asking me for input shared that they desire their watch to be in the best shape possible 300+ years hence, sure, I'd suggest they go with something having as much beveling as possible. But nobody asking me for input has identified that as a requirement. Side Note: With nearly every watch made being waterproof at surface pressures, the chances of a corrosive substance getting inside the case is very slim. If the person servicing a watch is top notch, they will perform the work in a sterile environment to avoid contaminating the movement. Indeed, that last bit is probably the one reason to send a relatively basic watch to the factory for service if one has an expensive watch that doesn't have a super complex or esoteric movement. Beveling is also a good example of something about which companies will tell half the story in order to convince the buying public that their product is better. It also highlights an aspect of the value proposition: how much does it really matter relative to the price one must pay to have beveled edges and relative to what one's expectations are for the watch. Fake Non-Rolexes Whereas a fake Rolex is pretty easy to assess -- it really just comes down to how important to you is the over-engineering in a Rolex and how much you are willing to pay for it -- it's a slightly different game with most non-Rolex watches that are replicated in the fake world. What's different is the quality of execution in the decorations and the effectiveness of non-basic complications. In some fakes, the decoration may not exist at all. Provided the watch is one that is only supposed to have decorations on visible parts, you can look at it and tell what's what. If it's a watch such as a PP that is supposed to have beveling even on edges one can't see, you need to remove and disassemble the movement to tell. Another thing is that the complication(s) may not work accurately/consistently, or it may just look like it exists when in fact it doesn't. Take a fake (or real for that matter) perpetual calendar watch. Unless you set it so the watch thinks that it's February 28th or 29th, you won't know whether it actually is doing what a perp cal complication does. If it's a moon phase, you need to set the time and spin the hours by, noting exactly when the moon rises and sets and whatnot and then compare that against the known cycles of the moon if you expect to determine how effective the fake is. (You have to do the same with a real one too if you aren't of a mind to trust the maker's assertions about the accuracy of the moon phase.) I think after reading the preceding, you'll understand why some watches are faked and some aren't. It's not so hard to fake a watch that doesn't have a presentation back. Since no Rolex Oyster does, that brand is an easy faking target. Ditto almost every dive watch. Once one gets beyond the simple and basic sorts of watch that can easily be replicated, at least visually, the value proposition of even the fakes comes into question. For example, even a person buying a fake perp cal at least wants some semblance of the complication actually functioning as its supposed to. A buyer of a fake watch that is supposed to have an exhibition back and a decorated movement wants there to be at least enough decoration that it looks like the real thing. Why? Because the whole point of buying the fake is to get the look while compromising on other things that that user feels don't matter too much and that s/he doesn't want to pay for. Does that make the non-Rolex high end watches that cost huge sums a better value? No, not at all. It just makes the fakes less of a good value proposition because they just can't do or have enough of the "cool stuff" the authentic ones have to make spending the money worth it. The fakes are so obviously dim shadows of what the real thing is that there's no point. A good fake Rolex, however, much more adequately apes the real animal. Obviously, that's something of a personally biased, subjective assessment on my part. I'm sure there are some folks whose desire for similarity stops at the watch face. I choose to believe that no matter whom one is, one still wants a good quality watch, and one that does what it's supposed to do. A slightly different crown guard, for example, is one thing. A fake perp cal that doesn't skip to March 1st or a fake Piaget that doesn't have the lovely, circular Geneva stripes is another. What this makes clear is that folks who do spend large sums on luxury items, watches, cars, clothes, etc., do so because they can. Folks who buy fakes, do so because they are unwilling to spend such large sums. Some folks who buy fakes and who buy authentic goods may do so for other reasons, but all those other reasons are emotional, not rational. Quote:
Nice to see you posting again. Hope all's well in your world. Quote:
To put it another way, I believe an M3 can outperform my E92. However, if I'm the one buying it, other than straight line acceleration, the fact that the M3 can corner better, has better braking response or better cornering ability, etc. is moot. I don't drive in any way or anywhere that the added capability is something I'm realizable by me. Sure, I probably could tangibly feel the greater potential in the way the car performs when I drive it in the mundane ways and places I drive, but if I don't use those capabilities, or if I only use/benefit from them once or twice, the value proposition associated with spending the premium for the M3 is pretty low. All the best.
__________________
Cheers,
Tony ------------------------------------------------------------------------------------------ '07, e92 335i, Sparkling Graphite, Coral Leather, Aluminum, 6-speed |
|
Appreciate
0
|
03-08-2014, 08:37 PM | #63 | ||
Major General
1064
Rep 5,660
Posts |
Quote:
Quote:
All the best.
__________________
Cheers,
Tony ------------------------------------------------------------------------------------------ '07, e92 335i, Sparkling Graphite, Coral Leather, Aluminum, 6-speed |
||
Appreciate
0
|
03-08-2014, 08:42 PM | #64 | |
Major General
1064
Rep 5,660
Posts |
Quote:
All the best.
__________________
Cheers,
Tony ------------------------------------------------------------------------------------------ '07, e92 335i, Sparkling Graphite, Coral Leather, Aluminum, 6-speed |
|
Appreciate
0
|
03-08-2014, 08:47 PM | #65 | |
Captain
321
Rep 905
Posts |
Quote:
|
|
Appreciate
0
|
03-09-2014, 01:14 AM | #66 |
Captain
155
Rep 663
Posts |
I really don't understand why people buy and wear fakes or counterfeit products.
From beginning to end, fake/counterfeit products are made to deceive people for one reason or another. People who make them are stealing the name and design or the people or corporation who owns the applicable trademarks, copyrights, patents, etc. People who buy them are [attempting to]deceive everyone around them by wearing/using it. If you are wearing a "Rolex" that wasn't made by Rolex, it's a counterfeit. The person wearing it knows this yet they are trying to pass it off as the original. Even if they are quick to admit it's a fake, why would they patronize a business that has no regard to the work of another? For some, they may want a Rolex look without paying the Rolex price but there are plenty of watch manufacturers that have copied designs of Rolex without using the name. If it's the name they want, then that comes at a price. People can argue whether watches are worth it's price. Thats fine with me - it might not be worth it to some but there are plenty that find the value in its name and price. It doesn't have to equal the cost of raw goods, it could have 800% markup and it still doesn't matter. Like the Picasso napkin story, a company like Rolex has "earned" their right to charge their prices because the movement, the materials, and the brand command a premium price. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|