BMW i5 and 5-Series Forum

Post Reply
 
Thread Tools Search this Thread
      03-13-2018, 04:31 PM   #1
RABAUKE
Banned
Canada
4640
Rep
1,395
Posts

Drives: Porsche 993, 2014 MB GLK
Join Date: Jan 2015
Location: The Golden Horseshoe, Ontario

iTrader: (0)

BMW V8 in a Mini, not a real mini though....

"Vini the Powerflex V8 Mini" will boast 415 horsepower and look basically stock

A new Mini Cooper is getting a 415-horsepower V8 swapped into it from an E92-generation BMW M3, courtesy the U.K. enthusiasts at EDM Racing.

The M3’s seven-speed dual-clutch transmission will accompany the engine into the chassis of “Vini the Powerflex V8 Mini,” after it gets converted to rear-wheel-drive.

David Power, of bushing manufacturer Powerflex, is the man who came up with the idea, explains DriveTribe; in want of a wild track car and fixated on a Cooper, he went to EDM since they specialize in Minis.

The M3 engine is a surprisingly good fit, but a custom frame with Subaru Impreza subframes and a roll cage had to be constructed, and they still haven’t been able to figure out how to make the transmission talk to the wheels, though lots of scratchbuilding will almost certainly be involved.

Power wants to keep the Mini looking as stock as possible, which would make it quite the sleeper. Of course, until it roasts the rear tires at a track day. We’ll keep you updated on the build.
Attached Images
 
Appreciate 1
      03-13-2018, 04:44 PM   #2
Igor_M5
Igor_M5's Avatar
United_States
2340
Rep
1,932
Posts

Drives: Many, BMW.
Join Date: Aug 2007
Location: New York City

iTrader: (10)

Garage List
Been following their build on IG, Vini, the V8 Mini.

Nice article and documentation here:
https://drivetribe.com/p/vini-the-v8...Ts2FQquCRyXGEQ

*Edit/Rant vBulletin really needs to get their shit together with cross platform IMG sharing.








Last edited by Igor_M5; 03-13-2018 at 05:00 PM..
Appreciate 1
      03-13-2018, 04:50 PM   #3
RABAUKE
Banned
Canada
4640
Rep
1,395
Posts

Drives: Porsche 993, 2014 MB GLK
Join Date: Jan 2015
Location: The Golden Horseshoe, Ontario

iTrader: (0)

The reason I say it's not a "Mini" is because my wife has a 79 Mini with a 1275 Cooper race motor in it....that's a Mini....
Appreciate 1
      03-13-2018, 04:50 PM   #4
///M Power-Belgium
General
///M Power-Belgium's Avatar
Belgium
71202
Rep
26,748
Posts

Drives: ///M3-E92-DCT Silverstone II
Join Date: Jul 2012
Location: Belgium

iTrader: (0)

Quote:
Originally Posted by RABAUKE View Post
"Vini the Powerflex V8 Mini" will boast 415 horsepower and look basically stock

A new Mini Cooper is getting a 415-horsepower V8 swapped into it from an E92-generation BMW M3, courtesy the U.K. enthusiasts at EDM Racing.

The M3’s seven-speed dual-clutch transmission will accompany the engine into the chassis of “Vini the Powerflex V8 Mini,” after it gets converted to rear-wheel-drive.

David Power, of bushing manufacturer Powerflex, is the man who came up with the idea, explains DriveTribe; in want of a wild track car and fixated on a Cooper, he went to EDM since they specialize in Minis.

The M3 engine is a surprisingly good fit, but a custom frame with Subaru Impreza subframes and a roll cage had to be constructed, and they still haven’t been able to figure out how to make the transmission talk to the wheels, though lots of scratchbuilding will almost certainly be involved.

Power wants to keep the Mini looking as stock as possible, which would make it quite the sleeper. Of course, until it roasts the rear tires at a track day. We’ll keep you updated on the build.
WOW !
Attached Images
 
__________________
"MAX VERSTAPPEN" IS THE 2021+2022+2023+2024 F1 WORLD CHAMPION - #UnLeashTheLion -

BPM DEV-Tune & DCT Software-Tune & Servotronic & coding ///Alpine HID Angeleyes ///Oem.exhaust mod.
Appreciate 0
      03-13-2018, 05:21 PM   #5
pokerface
Colonel
pokerface's Avatar
Canada
443
Rep
2,531
Posts

Drives: F25 X3 N20 / F80 ZCP
Join Date: Apr 2006
Location: Toronto

iTrader: (1)

Motor fits in but doesn't look like much else!
Appreciate 0
      03-13-2018, 05:34 PM   #6
///M Power-Belgium
General
///M Power-Belgium's Avatar
Belgium
71202
Rep
26,748
Posts

Drives: ///M3-E92-DCT Silverstone II
Join Date: Jul 2012
Location: Belgium

iTrader: (0)

I'm pretty sure ,for the S65 the Mini hood requires a HUGE powerdome !
Attached Images
 
__________________
"MAX VERSTAPPEN" IS THE 2021+2022+2023+2024 F1 WORLD CHAMPION - #UnLeashTheLion -

BPM DEV-Tune & DCT Software-Tune & Servotronic & coding ///Alpine HID Angeleyes ///Oem.exhaust mod.
Appreciate 0
      03-13-2018, 05:49 PM   #7
ShocknAwe
1Addict
ShocknAwe's Avatar
3592
Rep
8,139
Posts

Drives: E82, E70, 991.1
Join Date: Jul 2012
Location: Charleston

iTrader: (22)

Awesome. Mini is so small it probably won't feel the lack of tq. Can't wait for more updates.
__________________
Build: 1er Project8
Hauler: M57 Truck
Daily: 991.1 GTS
Appreciate 0
      03-13-2018, 06:48 PM   #8
RABAUKE
Banned
Canada
4640
Rep
1,395
Posts

Drives: Porsche 993, 2014 MB GLK
Join Date: Jan 2015
Location: The Golden Horseshoe, Ontario

iTrader: (0)

I'm seriously not high jacking my own thread there.....

Just when you thought it was safe to buy a Mini.



Once upon a time when the mountains were young, import-car buyers were avant-garde. These half-mad radicals thought nothing of trading in a perfectly good De Soto Firesweep for —whoa!—an English car! They craved something quirky and agile like a Morris Minor or Hillman Minx that worked. Worked! Started every morning. Lasted decades. Sold for cheap.
Of course, you nod, they wanted a BMC Mini, but engineered by Honda.
And 40-plus years later, Mini Tec of Royston, Georgia, offers just that—a rorty 220-hp Honda VTEC four-cylinder engine mashed into an original Mini. The real BMC Mini. Two of these wee paperweights parked together look like a pair of dice. Mini Tec will sell you a couple—or just one—then run for the tall brush. They aren't afraid the car won't work; they're afraid it will.
The original Mini's charisma is so legendary that BMW gambled mega-millions—successfully—on its resurrection in 2001. But compared with the BMC Mini, BMW's version is a Peterbilt. The impossibly "cute" 1959 Mini designed by Sir Alec Issigonis still provokes helpless smiling. Among enthusiasts, ownership remains contagious; the minute one Issigonis Mini appears, the entire neighborhood must be dusted with flea-and-tick powder.
You're right, that's pure hyperbole. But with Minis, hyperbole is just good reporting. Add a dose of violent VTEC performance, and whoppers are automatic. The Mini Tec VTEC is one of the fastest, and, um, furious-est, drives south of a Z06. Just look at the numbers from the one we tested-1792 pounds and a claimed 220 horsepower. The Honda engine was originally for the Acura Integra Type R and was rated for 195 horsepower. But Mini Tec says better-breathing intake and exhaust systems add 25 ponies, and despite copious amounts of wheelspin, the VTEC Mini still scooted to 60 mph in 5.0 seconds.

But sliding a 21st-century VTEC into this Bronze Age Mini takes more than shoehorns and grease. Norman Holley, a Clemson graduate engineer, devised his Mini Tec B-series subframe to facilitate the VTEC Mini's Frankenstein-ism. The hood and the front fenders must be stretched forward four inches. (It's not noticeable until you're told it's there; then it looks cryptically cool.) The conversion doesn't change the stock Mini's front-suspension dimensions, welcoming any new or aftermarket Mini wheel. The Honda radiator has room to sit low, with no ugly hood modifications. A standard Mini brake servo and stock upper control arms and uprights combine with the standard Honda distributor and ECU. Camber, caster, and ride height are fully adjustable. Except for its invisible nose extension, the Mini Tec Mini is indistinguishable from a 35-hp '59 Mini.
From the pilot's seat it feels the same, too. If you've never sat in an original Mini, nothing can communicate its utter eensie-ness. But we'll try. One afternoon years ago, our friend John Clark retired from racing in a Mini, for cause. He is an XXL sorta guy, and his racing Mini Cooper S fit him like spandex. He was on the track annoying physics that day, tossing the 80.0-inch wheelbase— 80 inches!—side to side through the esses at great speed when, suddenly, the car took matters into its own hands. Rolling, leaping, and rolling, it closed in around him like aluminum foil around take-out fried chicken. Unhurt, but shaken and stirred, he was removed surgically and found other pursuits. The point? This little car feels nearly as wide as it is long, decidedly not the formula for high-speed stability—and with a VTEC under its chin, high speed is never far away. A word to the wise.
Accordingly, full-power applications put our test car in a sort of swoon, veering sharply this way or that, depending on the phases of the moon. Acceleration is stupendous, of course. We had no difficulty keeping up with an aggressively driven AMG SL65 in heavy interstate traffic. But then it started to rain. In the wet, throttle applications sent our micro 175/60R-13 Yokohamas sluicing still farther this way or that, ignoring the moon entirely. Exciting.
And the distinctive Mini driving position added spice. The steering wheel was tilted toward horizontal, city-bus style, as befitted the original Mini. And our test car had a bit less caster than the ideal, making for so-so on-center response. Caster settings can be adjusted to suit, and in the dry, uncertain steering feel was merely a distraction. But at speed in the rain, giving the throttle hard bursts to stay with the AMG, we were the world's busiest bus driver.
Not surprisingly, given the age of this silk purse, a little sow's ear is showing. The steering-wheel position, throttle steer, short wheelbase, and tiny wheels all counseled caution—while delivering stellar skidpad numbers, incidentally. That said, this VTEC Mini is surely the definitive pocket rocket. And speaking candidly, Mini Tec allowed that although the customer who ordered our test car demanded the full turn-key $30,000 Type R treatment, milder Honda VTEC's of, say, 170 horsepower (starting at about $19,000 for a complete car) make a far more drivable package. Or if you already have a Mini and a Honda powertrain, you could simply buy the $2500 kit and do the conversion yourself. Sounds right to us.
If you're a guy (or gal) who thinks Vin Diesel is a girly man, this R-car is the Mini for you.
Attached Images
 
Appreciate 0
      03-13-2018, 07:55 PM   #9
GuidoK
#buildnotbought
GuidoK's Avatar
13777
Rep
5,479
Posts

Drives: Z4 3.0i ESS TS2+
Join Date: Jul 2012
Location: Tinkering in the garage

iTrader: (0)

^a bit the same idea as ringmini.
They race them on the ring and ralley (300hp vtec turbo in a mini....)
btg did a page on them:
https://www.bridgetogantry.com/video...00hp-ringmini/
__________________
Z4 3.0i | ESS TS2+ supercharger | Quaife ATB LSD | Brembo/BMW performance BBK front/rear | Schrick FI cams | Schmiedmann headers+cats | Powerflex/strongflex PU bushings | Vibra-technics engine mounts | H&R anti rollbars | KW V3 coilovers/KW camber plates | Sachs race engineering clutch | tons of custom sh#t
Appreciate 0
Post Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:32 AM.




g60
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST