05-13-2020, 03:19 PM | #925 |
Colonel
![]() ![]() 5697
Rep 2,041
Posts
Drives: Here and There
Join Date: Jul 2013
Location: North Georgia Mountains
iTrader: (1)
Garage List 97 Toyota Land Cruiser [8.33]
2004 Ford F-150 [10.00] (2)11 BMW E90M Stri ... [10.00] (1)11 BMW E90M Stri ... [10.00] 16 Toyota Land Cruiser [10.00] |
What are you guys doing for irrigation? I wish I had a built-in, but I'm not going to drop the coin on a place we only intend on being in for another couple years or so. We've got a tiny bit over half an acre that's long and relatively narrow. Closest spigot I have to the grass closest to the street requires me to have ~150ft of hose and I'm just not coming up with a decent solution. I have a total of three spigots (one on each side of the house except the front) and I really can't run more than one of them at a time without significantly reducing the water output of both.
What's a good way to measure water pressure? What should it be? I don't want to have exterior pressure to take care of the yard in a good spot and find that I'm blowing a faucet off inside. Once pressure is figured out, what's some good hardware? I've seen some YouTube guys taking in-ground sprinkler heads and modifying them to be put on spikes. I really would like to be able to do multiple in series if possible. I'm currently putting one at the end of my hose length and it can take me over two hours to water the whole yards. We're in a bit of a drought right now with no rain on the horizon. I'm killing myself trying to keep the yard from dying of thirst. |
Appreciate
0
|
05-13-2020, 03:27 PM | #926 | |
Private
![]() 107
Rep 83
Posts |
Quote:
My yard is fully irrigated, but use these for beds. Maybe something similiar? https://www.gardeners.com/buy/snip-n...m/8589718.html |
|
Appreciate
1
spazzyfry1235696.50 |
05-13-2020, 03:29 PM | #927 |
Brigadier General
![]() ![]() 12091
Rep 4,884
Posts |
I have irrigation and put a well in for the irrigation. City water for the house.
__________________
Current: 2018 SO/SS F83 ZCP
Gone: 2015 SO/SO F82 |
Appreciate
0
|
05-13-2020, 03:43 PM | #928 |
Private
![]() 107
Rep 83
Posts |
|
Appreciate
0
|
05-13-2020, 03:45 PM | #929 |
Brigadier General
![]() ![]() 12091
Rep 4,884
Posts |
I out the well in because I was spending a lot on city water for irrigation. I think it was $1,200 back in 2002. Money well spent as I think it has paid for it self a few times over.
__________________
Current: 2018 SO/SS F83 ZCP
Gone: 2015 SO/SO F82 |
Appreciate
1
tim99ws6107.00 |
05-15-2020, 08:37 AM | #930 |
Lieutenant General
![]() ![]() ![]() ![]() 9269
Rep 14,532
Posts |
grass is doing well after that RGS/HUMIC12 app.
![]() ![]() tulips are doing great but pretty soon will be coming to their end of their life cyle ![]() ![]() ![]() Went to our local nursery and i picked up a full load of Super Tunias from Proven Winners! ![]() ![]() ![]() also picked up a couple varieties of Salvias ![]() ![]() ![]()
__________________
![]() ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg |
Appreciate
1
Rmtt8201.00 |
05-15-2020, 12:17 PM | #931 |
"Salud"
15761
Rep 5,100
Posts |
![]()
First blooms of our Hibuscus
![]() And surprisingly, my Fall Mums are still going strong in high 80 degrees! ![]()
__________________
![]() |
Appreciate
1
lsturbointeg9269.00 |
05-15-2020, 01:15 PM | #932 |
Lieutenant General
![]() ![]() ![]() ![]() 9269
Rep 14,532
Posts |
Mums are popular out here in OH. Maybe I'll grab a few and put them in my containers?
__________________
![]() ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg |
Appreciate
0
|
05-15-2020, 01:28 PM | #933 |
"Salud"
15761
Rep 5,100
Posts |
|
Appreciate
1
lsturbointeg9269.00 |
05-15-2020, 01:54 PM | #934 |
Lieutenant General
![]() ![]() ![]() ![]() 9269
Rep 14,532
Posts |
thanks Marcus! hopefully it turns out well
![]()
__________________
![]() ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg |
Appreciate
0
|
05-15-2020, 05:30 PM | #935 |
Colonel
![]() ![]() 5697
Rep 2,041
Posts
Drives: Here and There
Join Date: Jul 2013
Location: North Georgia Mountains
iTrader: (1)
Garage List 97 Toyota Land Cruiser [8.33]
2004 Ford F-150 [10.00] (2)11 BMW E90M Stri ... [10.00] (1)11 BMW E90M Stri ... [10.00] 16 Toyota Land Cruiser [10.00] |
Just got a water pressure gauge delivered and measured 40 psi at an exterior spigot. Think I could try cranking it up a bit to get some more life out of my sprinklers? I’ve read to not exceed 70 psi, so thinking about trying about 50 - 55 psi. Newer home built in 2016.
|
Appreciate
0
|
05-16-2020, 03:05 PM | #936 |
Colonel
![]() ![]() 5697
Rep 2,041
Posts
Drives: Here and There
Join Date: Jul 2013
Location: North Georgia Mountains
iTrader: (1)
Garage List 97 Toyota Land Cruiser [8.33]
2004 Ford F-150 [10.00] (2)11 BMW E90M Stri ... [10.00] (1)11 BMW E90M Stri ... [10.00] 16 Toyota Land Cruiser [10.00] |
Keeping the question game alive (I cranked up the pressure to the house this morning BTW... no toilets exploding yet)... Anyone try building their own privacy fence? I’ve got about 4000 sq ft of brush I’m going to clear while keeping the mature trees in place. Once I do that, I’m going to do ~340 linear feet of 6’ privacy fence (I’m thinking cedar pickets with treated pine for posts and crosses). I haven’t gotten any quotes for install, but I’m looking at roughly $3k in materials for DIY. I’d guess another $2.5k for install?
Anyone have any experience? |
Appreciate
0
|
05-19-2020, 03:58 PM | #937 |
First Lieutenant
![]() ![]() 75
Rep 374
Posts |
I posted my Automower on here a while back. Love it, but my side yard's drainage was so bad it kept getting stuck or clogged with mud. Last weekend I finally tackled the beast.
Hand dug the first 100 feet, machine dug the second 100 feet. Tied in 4 downspouts and 2 wall drains Cut my cable line twice Hit my irrigation lines three times Got caught in a thunderstorm before I could re-fill the second half, so i got to bury it with soaking wet clay the next day and its a huge mess. Yard still looks like a construction zone, but when it rains the water flies out of the pop up heads by the road. Hoping it looks respectable again in a few weeks... |
Appreciate
2
sygazelle15380.50 AlpineWhite_SJ1567.00 |
05-19-2020, 04:47 PM | #938 |
Long Time Admirer, First Time Owner
![]() 18691
Rep 9,445
Posts |
I had four WONDERFULLY SWEET blackberries off my bush last night. Sorry, gone before could be photographed. In MAY!!!
|
Appreciate
0
|
05-19-2020, 07:27 PM | #939 |
Lieutenant General
![]() ![]() ![]() ![]() 9269
Rep 14,532
Posts |
Sheesh...with all this rain I'm hoping I won't have to deal with fungus like last year
__________________
![]() ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg |
Appreciate
0
|
05-20-2020, 12:14 AM | #940 | |
Banned
![]() 1567
Rep 1,024
Posts |
Quote:
While they were doing it it rained and they noticed seepage out of the ground from the neighbor’s higher elevation so they put a French drain under the manifold on that side. They wrapped up just as the shut down went into effect so one side is pretty much back to normal but the other side is a disaster area - half filled in and now that the stuff they dug out and piled to the side has baked in some heat, it’s as hard as concrete. Wasn’t cheap, but it’s backbreaking work - they dug mostly by hand with a pick to break up the hard parts. Saved a bit since they originally quoted a flat rate but offered to do time and materials. I think we got the manifolds and tie ins plus the French drain for what they originally quoted for just putting in the manifold for. |
|
Appreciate
0
|
05-20-2020, 12:16 AM | #941 |
Banned
![]() 1567
Rep 1,024
Posts |
|
Appreciate
0
|
05-20-2020, 12:00 PM | #942 |
"Salud"
15761
Rep 5,100
Posts |
![]()
Our Celosia and Vincas starting to bloom for the Summer!
![]() ![]()
__________________
![]() |
Appreciate
2
RickFLM412090.50 lsturbointeg9269.00 |
05-20-2020, 09:04 PM | #944 |
Lieutenant General
![]() ![]() ![]() ![]() 9269
Rep 14,532
Posts |
ordered my what use to be called CarbonX for my Memorial Day fertilizer app of the year
![]()
__________________
![]() ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg |
Appreciate
0
|
05-20-2020, 09:51 PM | #945 | |
Brigadier General
![]() 15381
Rep 3,491
Posts |
Quote:
I also installed an outdoor sump pump underground because there was a corner of the backyard patio that was to low to drain to the street naturally. I was hosing off the patio yesterday and thinking to myself, it was hard work putting it in but so worth the effort. |
|
Appreciate
0
|
05-21-2020, 12:17 AM | #946 |
Banned
![]() 1567
Rep 1,024
Posts |
Laid down the nematodes yesterday after the sun went over the horizon. Gotta water daily the next few days and hopefully they’ll get in the soil adequately before it heats up over the next few days.
Need to rototill some spots tomorrow and get the vegetables in the ground soon. Weekend project will be inspecting and re-staking the bubblers that are annoyingly on hose lines and not a timer/valve for the fruit trees and shrubs. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|