Picture of Last Items You Bought (NO WEAPONS)

1MOREMOD · 07-01-2019, 04:07 PM

Well think of a size calf would consider decent and subtract 2-3 inches that's where im at. I have some momentum on them and wanna keep it moving

Rmtt · 07-01-2019, 05:22 PM

I was always told that calves and flexed upper arms should be about the same in regards to perfect proportion.

If that's the case, I'm about 1.5" behind last time I measured them. Sadly they were slightly over 16.5 inches.

lsturbointeg · 07-01-2019, 08:45 PM

I've seen some huge ass calves on dudes to where it doesn't even get smaller to their ankles. Weird shit

1MOREMOD · 07-01-2019, 09:55 PM

Quote:

Originally Posted by Rmtt

I was always told that calves and flexed upper arms should be about the same in regards to perfect proportion.

If that's the case, I'm about 1.5" behind last time I measured them. Sadly they were slightly over 16.5 inches.

Yeah I've always heard that. My legs should also be as big as my waist right! My calves are 2 inches behind arms.

ShopVac · 07-01-2019, 11:03 PM

New front end. Went a little custom as the other needed replaced from the hit and run.

Need to drop in some gray sections and the cf lip...just need the paint to dry some first

1MOREMOD · 07-01-2019, 11:20 PM

Quote:

Originally Posted by lsturbointeg

I've seen some huge ass calves on dudes to where it doesn't even get smaller to their ankles. Weird shit

I think the larger ankles is related to too much soleus work it runs down much further than gastrocnemius.

Rmtt · 07-02-2019, 06:24 AM

Quote:

Originally Posted by ShopVac

New front end. Went a little custom as the other needed replaced from the hit and run.

Need to drop in some gray sections and the cf lip...just need the paint to dry some first

That's a good looking front bumper and grill piece!

Dang3r · 07-02-2019, 08:33 AM

Finally installed with wet elegance

1MOREMOD · 07-02-2019, 08:35 AM

Sounds like something from porn

Dang3r · 07-02-2019, 08:51 AM

Quote:

Originally Posted by 1MOREMOD

Sounds like something from porn

I know ya triggerpoints very well, counter stops just 2 minutes later after post

MPOWER5266 · 07-02-2019, 10:29 AM

New buckets and labels.

Untitled by Nick Wood, on Flickr

lsturbointeg · 07-02-2019, 06:15 PM

Bought the umbrella for the patio table

lsturbointeg · 07-03-2019, 05:55 PM

Quote:

Originally Posted by MPOWER5266

New buckets and labels.

Untitled by Nick Wood, on Flickr

Where did you order those from?

P1 · 07-03-2019, 10:07 PM

Quote:

Originally Posted by lsturbointeg

Where did you order those from?

Don't know about the OP, but I get all this stuff from US Plastics...

https://www.usplastic.com/catalog/de...arentcatid=687

Dog Face Pony Soldier · 07-04-2019, 11:35 AM

Picked up a 8000 series Bernzomatic torch to sear my proteins after I cook them with my sous vide immersion cooker. I've been using a screaming-hot cast iron pan to sear, but this gets wayyy hotter. Of course this means I had to also pick up some steaks to try it out! 🔥🥩😍

Crimson92 · 07-04-2019, 08:27 PM

Quote:

Originally Posted by glennQNYC

Picked up a 8000 series Bernzomatic torch to sear my proteins after I cook them with my sous vide immersion cooker. I've been using a screaming-hot cast iron pan to sear, but this gets wayyy hotter. Of course this means I had to also pick up some steaks to try it out! 🔥🥩😍

Do post results. I've been doing the the hot pan method for a while.

Dog Face Pony Soldier · 07-04-2019, 09:25 PM

Quote:

Originally Posted by Crimson92

Quote:

Originally Posted by glennQNYC

Picked up a 8000 series Bernzomatic torch to sear my proteins after I cook them with my sous vide immersion cooker. I've been using a screaming-hot cast iron pan to sear, but this gets wayyy hotter. Of course this means I had to also pick up some steaks to try it out! 🔥🥩😍

Do post results. I've been doing the the hot pan method for a while.

The best part of using the torch is there's no smoke; as compared to loads of smoke when I sear with my beloved Lodge skillet. This is a major advantage for an condo/apartment dweller like myself.

Also, the torch is wayyy hotter than the skillet. This is the 8000 series using mapp gas that burns at 3750 degrees Fahrenheit (2065 Celsius). This power lets you sear the outside without cooking the inside of the protein at all.

One more nicety is its easier to sear the edges with a torch. This is especially nice when your protein is irregular like a T-bone, or just awkward to sear in a pan, like a roast or tenderloin.

This was my first try...

Dang3r · 07-05-2019, 03:05 AM

Quote:

Originally Posted by glennQNYC

This is the 8000 series using mapp gas that burns at 3750 degrees Fahrenheit (2065 Celsius).

Dude, Im quite sure you mispelled the temperatures, at 2065 deg C all would instantly meltdown, even your tasty meat would become less than bricks of charcoal

Dog Face Pony Soldier · 07-05-2019, 02:47 PM

90 min of range time. ☄️🏌🏿*♂️

Irishsig · 07-05-2019, 04:20 PM

Finally got my AC Schnitzer replica front lip.
Only needed a little sanding for fitment.
It took forever (6 weeks) to arrive from China but the price ($139) was worth the wait.

View post on imgur.com

UncleWede · 07-05-2019, 05:23 PM

Quote:

Originally Posted by glennQNYC

90 min of range time. ☄️🏌🏿*♂️

PULL!!!!!!

bosstones · 07-05-2019, 06:30 PM

25 gallon, mounted sprayer. It was a little more costly than a tow-behind sprayers but I think it'll be worth it due since better maneuverability (and storage aspect). People looked at me a little funny since I brought it home in a BMW. What....BMW people don't do their own yard work?!

07-01-2019, 04:07 PM	#6293
1MOREMOD - 11822 Rep 23,186 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	Well think of a size calf would consider decent and subtract 2-3 inches that's where im at. I have some momentum on them and wanna keep it moving
	Appreciate 0 Quote

07-01-2019, 05:22 PM	#6294
Rmtt Colonel 8204 Rep 2,250 Posts Drives: 2011 BMW 128i, 2008 LS3 C6 Join Date: Jan 2019 Location: South Carolina iTrader: (3)	I was always told that calves and flexed upper arms should be about the same in regards to perfect proportion. If that's the case, I'm about 1.5" behind last time I measured them. Sadly they were slightly over 16.5 inches. __________________ Everybody has a gameplan....until they get punched in the mouth.
	Appreciate 0 Quote

07-01-2019, 08:45 PM	#6295
lsturbointeg Lieutenant General 9242 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	I've seen some huge ass calves on dudes to where it doesn't even get smaller to their ankles. Weird shit __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 0 Quote

07-01-2019, 11:03 PM	#6297
ShopVac Not willing to take advice 4699 Rep 1,576 Posts Drives: F82 M4 - 6MT Join Date: May 2010 Location: PA iTrader: (1) Garage List 2014 Porsche 981 Bo ... [10.00] 2018 BMW M4 [9.87] 2023 Genesis GV70 [8.25] 2014 Audi S4 [8.25]	New front end. Went a little custom as the other needed replaced from the hit and run. Need to drop in some gray sections and the cf lip...just need the paint to dry some first
	Appreciate 2 Rmtt8204.00 King Rudi13079.50 Quote

07-02-2019, 08:33 AM	#6300
Dang3r Schmollbraten 12484 Rep 1,985 Posts Drives: M4CPC // HP4 Comp. Join Date: Jun 2015 Location: Liandri Central Core iTrader: (0)	Finally installed with wet elegance Attached Images __________________ Citizen of ///M - Town, where too much is just right Some say, that my scrotum has its own small gravity field and when Im slowing down that brake lights come on at my buttox
	Appreciate 0 Quote

07-02-2019, 08:35 AM	#6301
1MOREMOD - 11822 Rep 23,186 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	Sounds like something from porn
	Appreciate 0 Quote

07-02-2019, 10:29 AM	#6303
MPOWER5266 Major 4781 Rep 1,189 Posts Drives: 1997 Dinan m3 Join Date: Oct 2017 Location: Ga iTrader: (0)	New buckets and labels. Untitled by Nick Wood, on Flickr
	Appreciate 5 King Rudi13079.50 PoorLurker1138.50 lsturbointeg9242.00 Dang3r12483.50 P111739.00 Quote

07-02-2019, 06:15 PM	#6304
lsturbointeg Lieutenant General 9242 Rep 14,521 Posts Drives: 2011 535i Jet Black Join Date: Aug 2014 Location: Asian lost in OH iTrader: (0)	Bought the umbrella for the patio table __________________ ~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg
	Appreciate 2 nyalpine907570.50 Rmtt8204.00 Quote

07-04-2019, 11:35 AM	#6307
Dog Face Pony Soldier 2006 TIME Person Of The Year 9705 Rep 6,445 Posts Drives: M Sport 335i Join Date: May 2013 Location: North Jersey iTrader: (0) Garage List 2014 335i [9.74]	Picked up a 8000 series Bernzomatic torch to sear my proteins after I cook them with my sous vide immersion cooker. I've been using a screaming-hot cast iron pan to sear, but this gets wayyy hotter. Of course this means I had to also pick up some steaks to try it out! 🔥🥩😍 Attached Images __________________
	Appreciate 1 RickFLM411955.50 Quote

07-05-2019, 02:47 PM	#6311
Dog Face Pony Soldier 2006 TIME Person Of The Year 9705 Rep 6,445 Posts Drives: M Sport 335i Join Date: May 2013 Location: North Jersey iTrader: (0) Garage List 2014 335i [9.74]	90 min of range time. ☄️🏌🏿*♂️ Attached Images __________________
	Appreciate 0 Quote

07-05-2019, 04:20 PM	#6312
Irishsig In Hoc 316 Rep 626 Posts Drives: 2016 M4 6MT MG/SO Join Date: Jul 2013 Location: SoCal iTrader: (1) Garage List 2016 BMW M4 [0.00]	Finally got my AC Schnitzer replica front lip. Only needed a little sanding for fitment. It took forever (6 weeks) to arrive from China but the price ($139) was worth the wait. View post on imgur.com View post on imgur.com __________________ 2016 M4 MG/SO 6MT- Max PSI Intakes - BMS Stage 1 - Swift Spec R - CG Precision Valve controller - 20" DPE Flowtech 5S - AA Midpipe & all the external CF goodies. Last edited by Irishsig; 07-05-2019 at 05:43 PM..
	Appreciate 1 Rmtt8204.00 Quote

07-05-2019, 06:30 PM	#6314
bosstones Lieutenant Colonel 1266 Rep 1,608 Posts Drives: o_0 Join Date: Mar 2008 Location: Suburbia iTrader: (0)	25 gallon, mounted sprayer. It was a little more costly than a tow-behind sprayers but I think it'll be worth it due since better maneuverability (and storage aspect). People looked at me a little funny since I brought it home in a BMW. What....BMW people don't do their own yard work?! Attached Images __________________ - Jeff bosstones' flickr
	Appreciate 1 lsturbointeg9242.00 Quote