[bimmette]

Originally Posted by jtodd_fl

If unpairing the mouse does not work, can you borrow another bt device (like a keyboard or headset or something) to try to connect. I would try to eliminate the BT card in the computer as a cause.

I uninstalled the old mouse and the new one isn't showing as being installed. I just plug the little stub into the USB port and it should install automatically, right?

[Joekerr]

Originally Posted by jtodd_fl

You're (not your) concern is very touching.

#nohomo

You'd never know it until right this moment, but I ninja-edited my post because I totally screwed the "it's" not "its" part.

Just trying to ease your pain.

[jtodd_fl]

Originally Posted by Aatish

Legit helped Tara with computer issues by recommending Windex.

Well, you're Indian... tech support is natural for you.

#notracistjustfunny

[jtodd_fl]

Originally Posted by Joekerr

#nohomo

You'd never know it until right this moment, but I ninja-edited my post because I totally screwed the "it's" not "its" part.

Just trying to ease your pain.

Thanks... like lube. #stillnohomo

Thanks for your honesty.

[Aatish]

Originally Posted by jtodd_fl

Well, you're Indian... tech support is natural for you.

#notracistjustfunny

[bimmette]

Originally Posted by Aatish

Ok now the entire mouse cursor has disappeared!!!!!!! ARGHHHHHH HELP!!!

[bimmette]

Under "connected devices" the mouse receiver shows up, but under "mouse" it shows nothing installed.

[///M Power-Belgium]

Originally Posted by jtodd_fl

Well, you're Indian... tech support is natural for you.

#notracistjustfunny

You're an Indian too !
But from the feather kind , and everytime that I see you ...You make me think on my bow and now I really miss my bow again ...
And of course on my arrows too !








#notracistjustfunny

[UncleWede]

Mice often have a separate power control on the bottom.

Did a folder pop up when you connect the receiver? There may be installation files/instructions on the receiver.

[Aatish]

Originally Posted by bimmette

Under "connected devices" the mouse receiver shows up, but under "mouse" it shows nothing installed.

Do a hard reboot

[bimmette]

Originally Posted by Aatish

Do a hard reboot

How?

[jtodd_fl]

Originally Posted by bimmette

Under "connected devices" the mouse receiver shows up, but under "mouse" it shows nothing installed.

Oh... so it is connecting to a receiver... not to in internal card. OK.

Is there a pairing process with that receiver? Can you post a link to (or send a picture of ) the mouse / mouse & receiver combo.

[RJ_]

Originally Posted by bimmette

Ok now the entire mouse cursor has disappeared!!!!!!! ARGHHHHHH HELP!!!

Have you tried turning off and back on again?

[bimmette]

Originally Posted by UncleWede

Mice often have a separate power control on the bottom.

Did a folder pop up when you connect the receiver? There may be installation files/instructions on the receiver.

I can't get that red laser looking light on on the bottom of the mouse. But the top has a green button lit up showing it's got power.
I had a pop up showing it was installing but it doesn't look like it worked and I can't get that screen to pop up again n

[UncleWede]

So, I did a Query from Microsoft, then paired the two Unique ID fields, and copied the whole result to a new tab and got my combined excel data in the right format. Then was even able to do several sub-condition sorting routines, and now the canvassers can go hit only those VBM who returned ballot in last election, street by street.

[jtodd_fl]

Originally Posted by bimmette

I can't get that red laser looking light on on the bottom of the mouse. But the top has a green button lit up showing it's got power.
I had a pop up showing it was installing but it doesn't look like it worked and I can't get that screen to pop up again n

If you remove/uninstall the device, then shut everything down and start it all back up you should get that popup again.

[bimmette]

Originally Posted by RJ_

Have you tried turning off and back on again?

Ok trying for the 4th time.

[Aatish]

Originally Posted by bimmette

How?

If laptop has removable battery...

1.) Turn off laptop
2.) Remove battery
3.) With no battery or power source, hold down power button for 30s
4.) Pop battery back in
5.) Turn on laptop.


If non-removable battery....
1.) Close all applications.
2.) Remove any external devices.
3.) Hold down power button until laptop powers off.
4.) Wait 30s
5.) Turn on laptop

[bimmette]

Originally Posted by UncleWede

So, I did a Query from Microsoft, then paired the two Unique ID fields, and copied the whole result to a new tab and got my combined excel data in the right format. Then was even able to do several sub-condition sorting routines, and now the canvassers can go hit only those VBM who returned ballot in last election, street by street.

I'm ready to kill someone so it may be you!

[jtodd_fl]

Originally Posted by bimmette

I'm ready to kill someone so it may be you!

Last time someone just picked him at random, because SOMEONE was getting it, he ended up married with a kid.

[Aatish]

Originally Posted by jtodd_fl

Last time someone just picked him at random, because SOMEONE was getting it, he ended up married with a kid.

[bimmette]

If I got an old-fashioned mouse with a wire, is that guaranteed to work instantly?
I'm running out of time here. With no mouse cursor, this is impossible to get my work done.