Cordless Drills?

HRC · 04-04-2006, 01:52 PM

I need to get a drill for around the house and to install my aluminum pedals! I don't know much, but I am considering something like this...
Dewalt

Danny

saini023 · 04-04-2006, 02:43 PM

IMO makita drills are the way to go. they are light weight and good quality i use a makita 9.6v becuase i work a lot on cars..dewalt are good drills also...just get a little heavy for the stuff i need a drill for..

HRC · 04-04-2006, 02:49 PM

Quote:

Originally Posted by saini023

IMO makita drills are the way to go. they are light weight and good quality i use a makita 9.6v becuase i work a lot on cars..dewalt are good drills also...just get a little heavy for the stuff i need a drill for..

Thanks for the reply! I used to always used Makita drills in the past when I installed car stereos in the past. Since then, Dewalt seems to be a good choice. That particular model weighs about 4lbs. What's the benefit of 14v vs lowers ones?

Danny

Squawks · 04-04-2006, 03:02 PM

The voltage rating just means how long the drills can last power-wise.

If you want actual motor/drilling strength, that's where you look at the current/amp rating. Last I looked at drills, drilling power is comparable between many corded and cordless models.

Laplacian · 04-04-2006, 03:13 PM

Quote:

Originally Posted by HRC

I need to get a drill for around the house and to install my aluminum pedals! I don't know much, but I am considering something like this...
Dewalt

Danny

I have this drill and I like it very much. My dad has the cordless screwdriver version and it is great also. Dewalt has nice stuff--plenty of power, good durability, and reasonably priced for what you get.

Mikita is also good--I have used their cordless set briefly and liked it as well.

If you go with the Dewalt, get it from Costco. That's where I got mine. It was cheaper and it came with a nice set of bits (drill bits, extenders, and various phillips and flathead bits). Plus you can't beat Costco's return policy, just in case.

06330i · 04-04-2006, 04:00 PM

i have rigid drills, love em, great product

tl_boy · 04-04-2006, 04:14 PM

i wouldn't get les than 18volt cordless. too weak for imho.

mds82 · 04-04-2006, 04:17 PM

ryobi makes some good drills and combo kits. i love them

saini023 · 04-05-2006, 12:11 AM

Quote:

Originally Posted by Laplacian

IIf you go with the Dewalt, get it from Costco. you can't beat Costco's return policy, just in case.

i agree..get it from costco...return policy is great..

ward · 04-05-2006, 12:13 AM

I'd agree with holding out for 18V

the lower voltages may be too weak, also consider at least one extra battery so you won't be stuck unable to work while waiting for a battery to charge

NaTuReB0Y · 04-05-2006, 01:15 AM

i got one from Kragen.....a Nikota....18 volt......$29.99

i've been using it for a few years now.....and it's fine!

$169 for a drill is too much IMO........

HRC · 04-05-2006, 03:40 AM

Quote:

Originally Posted by NaTuReB0Y

i got one from Kragen.....a Nikota....18 volt......$29.99

i've been using it for a few years now.....and it's fine!

$169 for a drill is too much IMO........

Nice Kevin!! :rocks:

Danny

Laplacian · 04-05-2006, 12:16 PM

Quote:

Originally Posted by NaTuReB0Y

i got one from Kragen.....a Nikota....18 volt......$29.99

i've been using it for a few years now.....and it's fine!

$169 for a drill is too much IMO........

I used to think so before I went through two $35 drills. If you're only doing some very simple, light work, then a $30-50 drill is just fine. But if you want to drill into some thick wood, etc., forget it.

I bought a $35 Coleman drill from Costco. The thing was terrible. It was barely powerful enough to put up some blinds. I broke two of the bits that came with it and stripped another couple. This was after only about 4 or 5 drill holes and screws. The power was pretty crappy too (a higher voltage than the Dewalt one that I got). I didn't want to spend over $100 on a simple cordless drill so I returned it and got another one. Same thing happened. Then Costco brought a couple of nice Dewalt sets and I bought one of them. Great drill, no stripped/broken bits, plenty of power, and an extra battery.

If you do various light repairs, etc. around the house, it pays to have a good drill--you never know when you'll need it. But if you're not a handy person and just need something to mount the occasional mirror, then *maybe* a cheapo drill will be okay--but only if the job is very simple and straightforward. I'll never buy a crappy power tool again. A good one should last many years through many jobs.

tl_boy · 04-05-2006, 07:24 PM

I'm not sure of a $35 drill. Seems too low to me. Check out fatwallet.com, you may find some deals there are higher 'list priced' drills, for less.

I agree that you need a good drill. Guys, I have a friend who even put a drill on her wedding registry! Its a very useful item.

I wouldn't pay 200 or so, but I would you think you can get a good cordless for 60-80 bucks. I think that should get you something good.

As far as drill bits, if they are stripping quickly, then the quality of them sucks. I have had good experience with Black and Decker drill bits. If I need something for occasional use, I"ll buy the dollar store drill bit set. You can use it a few times, and then it screws up, but thats okay i guess. Better put pressure into the screw you are drillling, it won't strip so bad. Stripping will usually occur if it comes out and is turning against the top of the screw.

why am i even talking about drills!

HRC · 04-05-2006, 11:17 PM

Quote:

Originally Posted by tl_boy

...why am i even talking about drills!

Cuz it's off-topic and you want to help!!!

:rocks:

Danny

HRC · 04-07-2006, 02:15 AM

I ended up buying this today. I'm hoping the bits that I purchased will go thru the metal brake pedal. A big Thank You! to all of you for helping me out!

Danny

red_wagen · 04-07-2006, 09:26 AM

Nice! I have the 18v version. A lil heavy but it's great for repetitive tasks that need a lot of power.

Laplacian · 04-07-2006, 12:06 PM

Very nice--you won't regret spending a bit more to get some quality. Hope you got it from Costco too!

NaTuReB0Y · 04-07-2006, 10:40 PM

dewalt is definitely a good brand.....all my bits are dewalt!

tl_boy · 04-08-2006, 01:43 AM

looks good. 14.4 should be okay for casual use. I think Dewalt is pretty good. The bits look good quality, titanium.

Hunter399 · 04-08-2006, 01:58 AM

How much did the drill cost and where did you buy it from?

Thanks

HRC · 04-08-2006, 02:58 AM

Quote:

Originally Posted by hunter399

How much did the drill cost and where did you buy it from?

Thanks

I think the drill was $179.99 and the bits were $18.99 at Home Depot.

Danny

04-04-2006, 01:52 PM	#1
HRC MAUI BUILT 509 Rep 7,781 Posts Drives: 2006 330i MT Join Date: Jun 2005 Location: NORCAL iTrader: (10) Garage List 2002 E46 325i [0.00] 2012 E70 35i [0.00]	Cordless Drills? I need to get a drill for around the house and to install my aluminum pedals! I don't know much, but I am considering something like this... Dewalt Danny __________________ Arctic/Blk Leather/Alum.Trim/MT/ZSP/Sunshades/Blk Lines/M3 Illuminated Knob/Alcantara Performance Wheel/M-E-Brake Handle/Euro Fog Switch/Koni Yellows/H&R Sport Springs/19" VMR V718's w/PS2 Tires/M-Tech Body Kit/Carbon Fiber Spoiler/Bimmian Interior Bulbs/OEM Eye Glass Tray/SSK/Alcantara Boot/Split Armrest/OEM Dual Rear Power Outlets/Rear Ashtray Delete/OEM Alum. Pedals/Osram 6000K/Brex Rings/LED Side Markers/BMS Power Box
	Appreciate 0 Tweet Quote

04-04-2006, 02:43 PM	#2
saini023 Second Lieutenant 16 Rep 292 Posts Drives: 2006 330i Join Date: Feb 2006 Location: Bay Area iTrader: (2) Garage List 2006 330i [0.00]	IMO makita drills are the way to go. they are light weight and good quality i use a makita 9.6v becuase i work a lot on cars..dewalt are good drills also...just get a little heavy for the stuff i need a drill for.. __________________ 330i Jet Black on Black, ZSP, ZPP, Steptronic, Clear Bra, Comfort Acess, Sirius, OEM Alarm Mods:20% Tint F/R, Xenon Interior Lights, Xenenis Tru-match Fog Lights, , V1 (hardwire), Black and White Roundels, Blackline Tailights, White Angel Eyes (PMB), (2) 12'' Kicker L7,TvandNav2go, Playstation 2, ACS Roof Spoiler, 5 Series iDrive Leather Knob, Brex kit
	Appreciate 0 Quote

04-04-2006, 03:02 PM	#4
Squawks One of my two dachshunds: 56 Rep 663 Posts Drives: B6 A4 3.0 Quattro Join Date: Aug 2005 Location: Ithaca, NY iTrader: (0)	The voltage rating just means how long the drills can last power-wise. If you want actual motor/drilling strength, that's where you look at the current/amp rating. Last I looked at drills, drilling power is comparable between many corded and cordless models. __________________ I'm sorry about my outlandish behavior - there's too much blood in my alcohol system.
	Appreciate 0 Quote

04-04-2006, 04:00 PM	#6
06330i fresher den you 37 Rep 986 Posts Drives: 2004 x3 Join Date: Feb 2006 Location: the shores, MI iTrader: (0) Garage List 2006 E90, 330i [0.00]	i have rigid drills, love em, great product
	Appreciate 0 Quote

04-04-2006, 04:14 PM	#7
tl_boy Major 88 Rep 1,329 Posts Drives: tl Join Date: Aug 2005 Location: houston iTrader: (0)	i wouldn't get les than 18volt cordless. too weak for imho.
	Appreciate 0 Quote

04-04-2006, 04:17 PM	#8
mds82 Major General 375 Rep 5,842 Posts Drives: 2006 325xi Join Date: Aug 2005 Location: South Central Connecticut iTrader: (40) Garage List 2006 325xi Snow Pics [0.00] 2006 BMW 325xi [0.00]	ryobi makes some good drills and combo kits. i love them
	Appreciate 0 Quote

04-05-2006, 12:13 AM	#10
ward Major General 161 Rep 6,158 Posts Drives: F Join Date: May 2005 Location: T iTrader: (0)	I'd agree with holding out for 18V the lower voltages may be too weak, also consider at least one extra battery so you won't be stuck unable to work while waiting for a battery to charge
	Appreciate 0 Quote

04-05-2006, 01:15 AM	#11
NaTuReB0Y Powered By 36DD 372 Rep 7,369 Posts Drives: 2006 E90 Join Date: Jul 2005 Location: Inland Empire iTrader: (12)	i got one from Kragen.....a Nikota....18 volt......$29.99 i've been using it for a few years now.....and it's fine! $169 for a drill is too much IMO........ __________________ 2006 E90 330i Jet Black \| 20" WORK VS-XX \| FK452 \| H&R Sport on Koni Yellow \| REMUS QUAD
	Appreciate 0 Quote

04-05-2006, 07:24 PM	#14
tl_boy Major 88 Rep 1,329 Posts Drives: tl Join Date: Aug 2005 Location: houston iTrader: (0)	I'm not sure of a $35 drill. Seems too low to me. Check out fatwallet.com, you may find some deals there are higher 'list priced' drills, for less. I agree that you need a good drill. Guys, I have a friend who even put a drill on her wedding registry! Its a very useful item. I wouldn't pay 200 or so, but I would you think you can get a good cordless for 60-80 bucks. I think that should get you something good. As far as drill bits, if they are stripping quickly, then the quality of them sucks. I have had good experience with Black and Decker drill bits. If I need something for occasional use, I"ll buy the dollar store drill bit set. You can use it a few times, and then it screws up, but thats okay i guess. Better put pressure into the screw you are drillling, it won't strip so bad. Stripping will usually occur if it comes out and is turning against the top of the screw. why am i even talking about drills!
	Appreciate 0 Quote

04-07-2006, 02:15 AM	#16
HRC MAUI BUILT 509 Rep 7,781 Posts Drives: 2006 330i MT Join Date: Jun 2005 Location: NORCAL iTrader: (10) Garage List 2002 E46 325i [0.00] 2012 E70 35i [0.00]	I ended up buying this today. I'm hoping the bits that I purchased will go thru the metal brake pedal. A big Thank You! to all of you for helping me out! Danny Attached Images __________________ Arctic/Blk Leather/Alum.Trim/MT/ZSP/Sunshades/Blk Lines/M3 Illuminated Knob/Alcantara Performance Wheel/M-E-Brake Handle/Euro Fog Switch/Koni Yellows/H&R Sport Springs/19" VMR V718's w/PS2 Tires/M-Tech Body Kit/Carbon Fiber Spoiler/Bimmian Interior Bulbs/OEM Eye Glass Tray/SSK/Alcantara Boot/Split Armrest/OEM Dual Rear Power Outlets/Rear Ashtray Delete/OEM Alum. Pedals/Osram 6000K/Brex Rings/LED Side Markers/BMS Power Box
	Appreciate 0 Quote

04-07-2006, 09:26 AM	#17
red_wagen Private First Class 16 Rep 107 Posts Drives: with a grin... Join Date: Nov 2005 Location: North Jersey iTrader: (0)	Nice! I have the 18v version. A lil heavy but it's great for repetitive tasks that need a lot of power. __________________ -Jay
	Appreciate 0 Quote

04-07-2006, 12:06 PM	#18
Laplacian Private First Class 15 Rep 182 Posts Drives: 2006 330i Join Date: Jan 2006 Location: Los Angeles, CA iTrader: (0)	Very nice--you won't regret spending a bit more to get some quality. Hope you got it from Costco too! __________________ 2006 BMW 330i \| TiAg \| Gray - burl \| Sport \| Prem \| Steptronic \| AS
	Appreciate 0 Quote

04-07-2006, 10:40 PM	#19
NaTuReB0Y Powered By 36DD 372 Rep 7,369 Posts Drives: 2006 E90 Join Date: Jul 2005 Location: Inland Empire iTrader: (12)	dewalt is definitely a good brand.....all my bits are dewalt! __________________ 2006 E90 330i Jet Black \| 20" WORK VS-XX \| FK452 \| H&R Sport on Koni Yellow \| REMUS QUAD
	Appreciate 0 Quote

04-08-2006, 01:43 AM	#20
tl_boy Major 88 Rep 1,329 Posts Drives: tl Join Date: Aug 2005 Location: houston iTrader: (0)	looks good. 14.4 should be okay for casual use. I think Dewalt is pretty good. The bits look good quality, titanium.
	Appreciate 0 Quote

04-08-2006, 01:58 AM	#21
Hunter399 Major General 337 Rep 8,088 Posts Drives: F90M5 Join Date: Apr 2005 Location: Houston, TX iTrader: (33)	How much did the drill cost and where did you buy it from? Thanks
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search