[Muffnbluff]

Originally Posted by MHP

GT500 will continue on with an aluminum block 5.4L (same super undersquare 3.55x4.165" dimensions) until at least 2014.

There is a 500HP/700TQ version of the 5.0L Coyote (DI, ethanol injection, supercharged) named Miami that will be released in Australia only in 2013+ however it will not be a GT500 motor.

Dude, how do I get your job?

[StatenEye]

Originally Posted by BrokenVert

You obviously dont get the point of the sentence. Its saying that in a comparison of high powered muscle cars that the new 302 Mustang is the best.

Its called creative writing and its also called a hyperbole.

Ah, but see I do understand the point of his sentence. My point is that the sentence was poorly written and a review of a car is no place to use a hyperbole (creative writing or jargon used by people that cant properly and succinctly put their thoughts on paper without using ill formed colloquialisms.) focus on the facts and let the numbers speak for themselves. .

Here is guide for writting an essay, the use of a hyperbole is considered to be poor writting. I would expect better from a professional writer.

http://kimberlychapman.com/essay/badwriting.html

[StatenEye]

Originally Posted by Muffnbluff

Dude, how do I get your job?

[san~man]

First dyno test of a stock 5.0 motor:

http://www.mustang50magazine.com/tec...une/index.html

368rwhp/352tq on a Mustang dyno. Impressive motor.

[Boost Gomez]

Originally Posted by san~man

First dyno test of a stock 5.0 motor:

http://www.mustang50magazine.com/tec...une/index.html

368rwhp/352tq on a Mustang dyno. Impressive motor.

The quoted 412 hp is way underrated if those numbers aren't adjusted in any way.

[NYC6]

Good numbers but I'll be more interested in seeing impartial dyno #'s.

[Htown09]

Originally Posted by Boost Gomez

The quoted 412 hp is way underrated if those numbers aren't adjusted in any way.

More like 412 to the ground on a dynojet. The real question is what kind of stuff the motor in made with. Forged rods/pistons? The Termi had forged rods but the pistons had to be changed out for big power if I recall correctly.

It will be big if the ford boys can just slap a huge blower on there without changing out the engine internals.

[c0nstant]

Originally Posted by premedsoccergod

ford..... never

OH HURF DURF

[san~man]

Originally Posted by Htown09

More like 412 to the ground on a dynojet. The real question is what kind of stuff the motor in made with. Forged rods/pistons? The Termi had forged rods but the pistons had to be changed out for big power if I recall correctly.

It will be big if the ford boys can just slap a huge blower on there without changing out the engine internals.

The termi motor was fully forged. Single turbo setups made close to 1k on the stock internals

[Htown09]

Originally Posted by san~man

The termi motor was fully forged. Single turbo setups made close to 1k on the stock internals

I remember on the big #'s the motor was .20 over and replaced pistons not the stock ones but that is still not bad.

[san~man]

Originally Posted by Htown09

I remember on the big #'s the motor was .20 over and replaced pistons not the stock ones but that is still not bad.

You're prob right. Iirc, the stock stuff was Manley made, and maybe they were in the 8xx range stock with the bored over motors making the high hp #'s

I threw out all the KOTS issues I had, but the termi motors always had the highest hp #'s

[Irb Digital]

I plan on test driving one too. I hope it feels like a turd, or i'm saving some money!

[335e92tx]

The specific one is this vid won't be setting the world on fire real soon...

Sure is taking some heat in the forums also..

http://www.svtperformance.com/forums...ts-street.html
http://www.ls1tech.com/forums/street...stock-ls1.html

[onehungevo]

I like the horsepower and price but not the fact they will be all over the streets. I like cars fon many reasons and being uncommon is one of them. The new mustang is everywhere.

[TunedM2C]

^ I see more 3 series where I live.

[gonzo]

5.0's are just now released.

I guess you mean the new design. 3 series are like taxis here there are so many.

[TunedM2C]

^ I see less Mustangs in general than I do 3 series.

[herbz]

Originally Posted by Htown09

More like 412 to the ground on a dynojet. The real question is what kind of stuff the motor in made with. Forged rods/pistons? The Termi had forged rods but the pistons had to be changed out for big power if I recall correctly.

It will be big if the ford boys can just slap a huge blower on there without changing out the engine internals.

according to this article: http://www.mustang50magazine.com/tec...ine/index.html

(which seems pretty damn accurate.. and is a great read)

the connecting rods are the weak point of this engine. not only that, with the compression ratio at 11.0:1, i doubt people will just be slapping a blower on this car and calling it a day. the engine is pretty high strung from the factory as is. i'm sure some simple bolt ons will give decent gains, but i doubt anything more than that will be done reliably on stock internals. JMO.

time will tell. i'm not going to be the guinea pig who blows my money on this car and finds out for myself.

[herbz]

Originally Posted by onehungevo

I like the horsepower and price but not the fact they will be all over the streets. I like cars fon many reasons and being uncommon is one of them. The new mustang is everywhere.

then go buy a pontiac aztec bud. no one here is stopping you

[bdkevoIX]

Originally Posted by onehungevo

I like the horsepower and price but not the fact they will be all over the streets. I like cars fon many reasons and being uncommon is one of them. The new mustang is everywhere.

Retarded reason to like cars IMO.

[ChrisV]

Originally Posted by bdkevoIX

Retarded reason to like cars IMO.

Not really. I like uncommon cars as well, and why I (and most other people) build customs. I'm just not an "off the rack" kind of guy and don't like seeing myslef duplicated all over. My daily driver is customized and slightly unique (though almost too common for my tastes) and the project car I'm building is mostly a one-off and will not have any duplicates anywhere.